Buick Enclave manuals

Buick Enclave: Exterior Lamp Controls. Headlamp High/ Low-Beam Changer. Flash-to-Pass

Buick Enclave 2008-2017 Owners Manual / Lighting / Exterior Lighting / Exterior Lamp Controls. Headlamp High/ Low-Beam Changer. Flash-to-Pass

Exterior Lamp Controls

The exterior lamps control is located on the instrument panel to the left of

The exterior lamps control is located on the instrument panel to the left of the steering wheel.

It controls the following systems:

► Headlamps
► Taillamps
► Parking Lamps
► License Plate Lamps
► Instrument Panel Lights
► Fog Lamps (If equipped)

The exterior lamps control has four positions:

to turn the automatic light control off or on again. (Off): Briefly turn to this position to turn the automatic light control off or on again.

AUTO (Automatic): Turns the headlamps on automatically at normal brightness, together with the following:

► Parking Lamps . Taillamps . License Plate Lamps . Instrument Panel Light

lamps on together with the following: (Parking Lamps): Turns the parking lamps on together with the following:

► Taillamps
► License Plate Lamps
► Instrument Panel Lights

on together with the following lamps. A warning chime sounds if the driver door(Headlamps): Turns the headlamps on together with the following lamps. A warning chime sounds if the driver door is opened when the ignition switch is off and the headlamps are on.

► Parking Lamps
► Taillamps
► License Plate Lamps

► Instrument Panel Lights Turns on the fog lamps (if equipped). (Fog Lamps): Turns on the fog lamps (if equipped).

See Fog Lamps .

Headlamp High/ Low-Beam Changer

Push the turn signal/lane change lever away from you to turn the high beams on. Headlamp High/Low-Beam Changer: Push the turn signal/lane change lever away from you to turn the high beams on.

Pull the lever toward you to return to low beams.

This indicator light turns on in the instrument panel cluster when the high-beam

This indicator light turns on in the instrument panel cluster when the high-beam headlamps are on.

Flash-to-Pass

This feature is used to signal to the vehicle ahead that you want to pass.

If the headlamps are off or in the low-beam position, pull the turn signal lever toward you to momentarily switch to high beams.

Release the lever to turn the high-beam headlamps off.

READ NEXT:

 Daytime Running Lamps (DRL)/Automatic Headlamp System. Delayed Headlamps. Adaptive Forward Lighting (AFL)

Daytime Running Lamps (DRL)/Automatic Headlamp System Daytime Running Lamps (DRL) can make it easier for others to see the front of your vehicle during the day. Fully functional daytime running lam

 Hazard Warning Flashers. Turn and Lane-Change Signals. Turn Signal On Chime

Hazard Warning Flashers Hazard Warning Flasher: Press this button located on the instrument panel below the audio system, to make the front and rear turn signal lamps flash on and off. This war

SEE MORE:

 Description and Operation

WHEEL DRIVE SHAFTS DESCRIPTION AND OPERATION (FRONT) Front wheel drive axles are flexible assemblies. Front wheel drive axles consist of the following components: A front wheel drive shaft tri-pot joint (inner joint) A front wheel drive shaft constant velocity joint (outer joint) A front wheel

 California Proposition 65 Warning. California Perchlorate Materials Requirements. Accessories and Modifications

California Proposition 65 Warning Most motor vehicles, including this one, contain and/or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Engine exhaust, many parts and systems, many fluids, and some component wear by-products conta

© 2016-2024 Copyright www.benclave.com