Buick Enclave manuals

Buick Enclave: Cruise Control Messages. Door Ajar Messages. Engine Cooling System Messages

Buick Enclave 2008-2017 Owners Manual / Instruments and Controls / Information Displays / Cruise Control Messages. Door Ajar Messages. Engine Cooling System Messages

Cruise Control Messages

CRUISE SET TO XXX

This message displays whenever the cruise control is set. See Cruise Control  for more information.

Door Ajar Messages

DRIVER DOOR OPEN

This message displays and a chime sounds if the driver door is not fully closed and the vehicle is shifted out of P (Park). Stop and turn off the vehicle, check the door for obstructions, and close the door again. Check to see if the message still appears on the DIC.

HOOD OPEN

On some models, this message displays and a chime sounds if the hood is not fully closed. Stop and turn off the vehicle, check the hood for obstructions, and close the hood again. Check to see if the message still appears on the DIC.

LEFT REAR DOOR OPEN

This message displays and a chime sounds if the driver side rear door is not fully closed and the vehicle is shifted out of P (Park). Stop and turn off the vehicle, check the door for obstructions, and close the door again. Check to see if the message still appears on the DIC.

LIFTGATE OPEN

This message displays and a chime sounds if the liftgate is open while the ignition is in ON/RUN. Turn off the vehicle and check the liftgate.

Restart the vehicle and check for the message on the DIC display.

PASSENGER DOOR OPEN

This message displays and a chime sounds if the passenger door is not fully closed and the vehicle is shifted out of P (Park). Stop and turn off the vehicle, check the door for obstructions, and close the door again. Check to see if the message still appears on the DIC.

POWER LIFTGATE OFF

This message displays when the power liftgate has been turned off by pressing the power liftgate button on the center console.

RIGHT REAR DOOR OPEN

This message displays and a chime sounds if the passenger side rear door is not fully closed and the vehicle is shifted out of P (Park).

Stop and turn off the vehicle, check the door for obstructions, and close the door again. Check to see if the message still appears on the DIC.

Engine Cooling System Messages

ENGINE HOT A/C (Air Conditioning) OFF

This message displays when the engine coolant becomes hotter than the normal operating temperature.

See Engine Coolant Temperature Gauge . To avoid added strain on a hot engine, the air conditioning compressor automatically turns off. When the coolant temperature returns to normal, the air conditioning compressor turns back on. You can continue to drive your vehicle.

If this message continues to appear, have the system repaired by your dealer as soon as possible to avoid damage to the engine.

ENGINE OVERHEATED IDLE ENGINE

Notice: If you drive the vehicle while the engine is overheating, severe engine damage may occur. If an overheat warning appears on the instrument panel cluster and/or DIC, stop the vehicle as soon as possible.

Do not increase the engine speed above normal idling speed.

See Engine Overheating  for more information.

This message displays when the engine coolant temperature is too hot. Stop and allow the vehicle to idle until it cools down. See Engine Coolant Temperature Gauge .

See Overheated Engine Protection Operating Mode  for information on driving to a safe place in an emergency.

ENGINE OVERHEATED STOP ENGINE

Notice: If you drive the vehicle while the engine is overheating, severe engine damage may occur. If an overheat warning appears on the instrument panel cluster and/or DIC, stop the vehicle as soon as possible.

Do not increase the engine speed above normal idling speed.

See Engine Overheating  for more information.

This message displays and a continuous chime sounds if the engine cooling system reaches unsafe temperatures for operation.

Stop and turn off the vehicle as soon as it is safe to do so to avoid severe damage. This message clears when the engine has cooled to a safe operating temperature.

READ NEXT:

 Engine Oil Messages. Engine Power Mes. Fuel System Messages

Engine Oil Messages CHANGE ENGINE OIL SOON This message displays when the engine oil needs to be changed. When you change the engine oil, be sure to reset the CHANGE ENGINE OIL SOON message. See E

 Key and Lock Messages. Lamp Messages. Object Detection System Messages

Key and Lock Messages REPLACE BATTERY IN REMOTE KEY This message displays if a Remote Keyless Entry (RKE) transmitter battery is low. The battery needs to be replaced in the transmitter. See “Ba

SEE MORE:

 Specifications, Repair Instructions

SPECIFICATIONS FASTENER TIGHTENING SPECIFICATIONS Fastener Tightening Specifications ADHESIVES, FLUIDS, LUBRICANTS AND SEALERS Adhesives, Fluids, Lubricants and Sealers REPAIR INSTRUCTIONS STABILIZER SHAFT REPLACEMENT Removal Procedure 1. Raise and support the vehicle. Refer to Lifting and Jacking

 Description and Operation

AIR DELIVERY DESCRIPTION AND OPERATION The air delivery description and operation is divided into 4 areas: HVAC Control Components Air Speed Air Delivery Recirculation Operation HVAC Control Components HVAC Control Module The HVAC control module is a GMLAN device that interfaces between the o

© 2016-2024 Copyright www.benclave.com