Buick Enclave manuals

Buick Enclave: Remote Keyless Entry (RKE) System. Remote Vehicle Start. Liftgate

Buick Enclave 2008-2017 Owners Manual / In Brief / Initial Drive Information / Remote Keyless Entry (RKE) System. Remote Vehicle Start. Liftgate

Remote Keyless Entry (RKE) System

The RKE transmitter is used to remotely lock and unlock the doors from up to 60 m (195 ft) away from the vehicle.

Press  to unlock the driver door.

Press Press  again within five seconds to unlock the driver door.

Press to unlock all remaining doors. again within five seconds to unlock all remaining doors.

Press Lock and unlock feedback can be personalized. to lock all doors.

Lock and unlock feedback can be personalized.

To open or close the liftgate, press and hold Press  and release to locate the until the liftgate begins to move.

Press vehicle. and release to locate the vehicle.

Press seconds to sound the panic alarm. and hold for more than two seconds to sound the panic alarm.

Press alarm. again to cancel the panic alarm.

See Remote Keyless Entry (RKE) System Operation .

Remote Vehicle Start

Starting the Vehicle

With this feature the engine can be started from outside of the vehicle.

1. Aim the RKE transmitter at the vehicle.
2. Press and release 3. Immediately after completing Step 2, press and hold
3. Immediately after completing Step 2, press and hold When the vehicle starts, the parking lamps will turn on and remain on as long until the parking lamps flash.

When the vehicle starts, the parking lamps will turn on and remain on as long as the engine is running.

The doors will be locked and the climate control system may come on.

The engine will continue to run for 10 minutes. Repeat the steps for a 10-minute time extension. Remote start can be extended only once.

Canceling a Remote Start

To cancel a remote start:

 Aim the RKE transmitter at the vehicle and press and hold lamps turn off. until the parking lamps turn off.
► Turn on the hazard warning flashers.
► Turn the ignition switch on and then off.

See Remote Vehicle Start .

Door Locks

To lock or unlock a door manually:

► From the inside, use the door lock knob on the window sill.
► From the outside, turn the key toward the front or rear of the vehicle, or press the button on the Remote Keyless Entry or (RKE) transmitter. button on the Remote Keyless Entry (RKE) transmitter.

Power Door Locks

 

 

: Press to lock the doors. : Press to unlock the doors.
See Power Door Locks . : Press to lock the doors.

See Power Door Locks .

Liftgate

To open the liftgate the vehicle must be in P (Park). Press the touch pad under the liftgate handle. To close the liftgate, use the pull cup or pull strap as an aid.

Power Liftgate

On vehicles with a power liftgate, the vehicle must be in P (Park) to operate it.

► Press and hold Entry (RKE) transmitter. on the Remote Keyless Entry (RKE) transmitter.

► Press the liftgate button on the center console.

► Press the liftgate button on the center console.
► Press the touch pad switch on the outside liftgate handle.

For more information see Liftgate .

READ NEXT:

 Windows. Seat Adjustment. Memory Features

Windows Press the switch to lower the window. Pull the switch up to raise it. For more information, see Power Windows . Seat Adjustment Power Seat A. Seat Adjustment Control B. Reclining Seatbac

 Second Row Seats. Third Row Seats. Heated and Ventilated Seats

Second Row Seats   The second row seat can be folded to access the third row. Pull the sliding seat lever forward; the seat cushion folds, and the seat slides forward. See Rear Seats . Thir

SEE MORE:

 Tire Pressure. Tire Pressure Monitor System. Tire Pressure Monitor Operation

Tire Pressure Tires need the correct amount of air pressure to operate effectively. Notice: Neither tire underinflation nor overinflation is good. Underinflated tires, or tires that do not have enough air, can result in: ► Tire overloading and overheating which could lead to a blowout.

 CD Player

Playing a CD Insert a CD partway into the slot, label side up. The player pulls it in and the CD should begin playing. EJECT: Press and release to eject the disc that is currently playing. A beep sounds and Ejecting Disc displays. Once the disc is ejected, Remove Disc displays. The disc can

© 2016-2024 Copyright www.benclave.com