Buick Enclave manuals

Buick Enclave: Brake System Warning Light. Antilock Brake System (ABS) Warning Light. Tow/Haul Mode Light

Buick Enclave 2008-2017 Owners Manual / Instruments and Controls / Warning Lights, Gauges, and Indicators / Brake System Warning Light. Antilock Brake System (ABS) Warning Light. Tow/Haul Mode Light

Brake System Warning Light

The vehicle brake system consists of two hydraulic circuits.

If one circuit is not working, the remaining circuit can still work to stop the vehicle. For normal braking performance, both circuits need to be working.

If the warning light comes on, there is a brake problem. Have the brake system inspected right away.

This light should come on briefly when the ignition key is turned to ON/RUN.

This light should come on briefly when the ignition key is turned to ON/RUN. If it does not come on then, have it fixed so it will be ready to warn if there is a problem.

This light may also come on due to low brake fluid. See Brakes  for more information.

When the ignition is on, the brake system warning light will also come on when the parking brake is set.

The light will stay on if the parking brake does not release fully. If it stays on after the parking brake is fully released, it means there is a brake problem.

If the light comes on while driving, pull off the road and stop carefully.

Make sure the parking brake is fully released. The pedal may be harder to push or, the pedal may go closer to the floor.

It may take longer to stop. If the light is still on, have the vehicle towed for service. See Towing the Vehicle .

The brake system might not be working properly if the brake system warning lightWARNING
The brake system might not be working properly if the brake system warning light is on.

Driving with the brake system warning light on can lead to a crash. If the light is still on after the vehicle has been pulled off the road and carefully stopped, have the vehicle towed for service.

The brake message remains on until any DIC button is pressed.

The brake light remains on until the problem is fixed. See Brake System Messages  for more information.

Antilock Brake System (ABS) Warning Light

The ABS warning light comes on briefly when the ignition key is turned to ON/RUN.

The ABS warning light comes on briefly when the ignition key is turned to ON/RUN. This is normal.

If the light does not come on then, have it fixed so it will be ready to warn you if there is a problem.

If the light stays on, turn the ignition to LOCK/OFF. If the light comes on while driving, stop as soon as possible and turn the ignition off.

Then start the engine again to reset the system. If the light still stays on, or comes on again while driving, the vehicle needs service. If the regular brake system warning light is not on, there are still brakes, but no antilock brakes. If the regular brake system warning light is also on, there are no antilock brakes and there is a problem with the regular brakes. See Brake System Warning Light

Tow/Haul Mode Light

This light comes on when the Tow/Haul mode has been activated.

This light comes on when the Tow/Haul mode has been activated.

For more information, see Tow/Haul Mode .

READ NEXT:

 StabiliTrak® Indicator Light. Engine Coolant Temperature Warning Light. Tire Pressure Light

StabiliTrak® Indicator Light This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. If the system is working normally, the indicator li

 Engine Oil Pressure Light. Security Light. High-Beam On Light

Engine Oil Pressure Light WARNING Do not keep driving if the oil pressure is low. The engine can become so hot that it catches fire. Someone could be burned. Check the oil as soon as possible and

SEE MORE:

 Capacities and Specifications. Engine Drive Belt Routing

Capacities and Specifications The following approximate capacities are given in metric and English conversions. See Recommended Fluids and Lubricants  for more information. Engine Specifications Engine Drive Belt Routing Engine Drive Belt Routing  

 Description and Operation

COOLING FAN DESCRIPTION AND OPERATION Fig. 49: Cooling Fan Description and Operation The engine cooling fan system consists of 2 electrical cooling fans and 3 fan relays. The relays are arranged in a series/parallel (S/P) configuration that allows the engine control module (ECM) to operate both f

© 2016-2024 Copyright www.benclave.com